COAX SETUP
MENU ITEM VALUE Description
EARLY COMPL ON*
OFF Turns early print completion on or off for non-IPDS data sent over
the coax attachment. To turn early print completion on or off for
IPDS data, use the EARLY COMPL item on the IPDS Menu.
ON—sends an “order complete” as soon as data is received.
OFF—waits until the print job is physically complete to send
“order complete.”
PA1 none Selecting this value and pressing the Enter key sends a PA1
signal to the host.
Note: This applies to SCS only; not DSC/DSE or IPDS.
PA2 none Selecting this value and pressing the Enter key sends a PA2
signal to the host.
Note: This applies to SCS only; not DSC/DSE or IPDS.
70 User's Guide