Network Administrator Tip
If you installed a Token Ring card, please note that anytime you turn the printer off,
wait at least two or three seconds before turning the printer back on. A quick off-on
may cause the Token Ring card to start beaconing, which is a condition where a
signal is displayed on a Token Ring card when the card detects a problem. If the
printer is turned off and then on too quickly, this may cause the Token Ring card to
detect a false error and begin beaconing.
Using the Operator Panel Keys to Set Network Addresses
Following is a description of how the operator panel keys are used to set printer
network addresses:
Cancel Press the Menu or Item key to cancel any change or entry
before it takes effect. The change has taken effect if an
asterisk (*) is displayed to the right of the changed value.
Increment Press the Value key. The value increments by one each time
you press the key.
Fast Increment Press and hold the Value key. The value increments by ten at
a time while you hold the key.
Decrement Press the Shift and the Value keys.
Fast Decrement Press and hold the Shift and the Value keys.
202 User's Guide