c9pu298
5. Connect the power cords to printer and 2000-sheet finisher and power source.
Note: A power cord is not supplied with 2000-sheet finisher.
6. After the printer warms up, the READY message displays on the operator panel.
Note: If message display area shows solid rectangles, make sure the I/O cable is
attached firmly to both the 2000-sheet finisher and the printer. Also make sure the
I/O cable connectors are plugged into the appropriate connector.
Important
To confirm that you have correctly installed the 2000-sheet finisher, print a
configuration page. The report will list the 2000-sheet finisher. See “Example 1 —
Printing the Printer Configuration Page” on page 32.
Installing a Staple Cartridge
Follow these steps:
1. Turn printer and 2000-sheet finisher power off.
2. Unplug the printer and the 2000-sheet finisher power cords.
3. Open the stapler cover (1) and review the instructions on the inside of the stapler
cover.
Chapter 7. Installing Printer Options 191