3. Remove the green cleaning brush (1) from the printer. (The green cleaning brush is
located underneath the top cover.)
4. Slide the brush back and forth a few times to clean the anti-static teeth. (The
anti-static teeth are located near the green handle labeled 2.) Avoid touching the
transfer charging roller (1) as this could cause poor print quality.
5. Replace the brush and the toner cartridge.
6. Close the top cover and plug the power cord back into the power outlet.
7. Plug in power cord and turn on the printer.
Cleaning the Transfer Guide Area
If you have a problem with toner being smeared on your paper, you can clean this
area:
1. Turn off the printer and unplug the power cord.
2. Open the top cover and remove the toner cartridge. (Place the toner cartridge in a
protective bag to avoid direct sunlight.)
3. Avoid touching the transfer charging roller (1) as this could cause poor print quality.
144 User's Guide