TEST MENU ITEM Description
FACTORY DEFAULT Resets settings to the factory defaults. Note that some values, do not get reset.
These values include LANGUAGE, AUXSIZE, PCL SAVE, PS SAVE, BI-DI, IP
ADDRESS, SUBNET MASK, GATEWAY ADDRESS, and MAC ADDRESS.
Note: To reset all values, do one of the following:
For A4 paper: power the printer off and then power the printer on while
simultaneously pressing the Cancel Print key.
For letter paper: power the printer off and then power the printer on while
simultaneously pressing the Online key.
ONLINE HEX PRT
CANCEL ONLN HEX ONLINE HEX PRT prints an ASCII hexadecimal dump for troubleshooting purposes.
After you select this item, it changes to CANCEL ONLN HEX. Data that is sent to
the printer is not interpreted but is printed as raw data in hexadecimal values. To
stop printing data in hexadecimal values, select CANCEL ONLN HEX.
CX HEX PRT
CANCEL CX HEX CX HEX PRT prints an EBCDIC hexadecimal dump of non-IPDS data coming
across the coax cable; you can use the dump for troubleshooting coax problems.
After you select this item, it changes to CANCEL CX HEX. Data that is sent to the
printer is not interpreted but is printed as raw data in hexadecimal values. To stop
printing data in hexadecimal values, select CANCEL CX HEX.
TX HEX PRT
CANCEL TX HEX TX HEX PRT prints a hexadecimal dump for troubleshooting twinax problems. After
you select this item, it changes to CANCEL TX HEX. Data that is sent to the printer
is not interpreted but is printed as raw data in hexadecimal values. To stop printing
data in hexadecimal values, select CANCEL CX HEX.
FORMAT DISK Formats the optional hard drive.
STAPLE TEST Staples a test page to make sure the stapler is working correctly. Usually you
select this test after replacing a staple cartridge or if the stapler is not stapling
paper. The Stapler test uses A3, A4, B4, 11 x 17, legal, or letter size paper to
staple. One of these paper sizes must be loaded in the printer to perform this test.
Chapter 3. Navigating Through the Operator Panel Menus 47