4. If you can see the paper edge, hold the green handle (the green handle is labeled
2) and open the transfer guide lock tray (1) and then roll the paper (2) and remove.
There may be some unused toner on the paper.
5. If you cannot see the paper edge, hold the green handle (1) (the green handle is
labeled 2) and open the transfer guide lock tray (2).
Note: Make sure you do not lift up the transfer guide lock tray (2) beyond its
upright position as this could damage the printer.
6. Lift up transfer guide lock tray and remove paper.
7. Release the green lever (green lever is labeled 3).
8. Close the transfer guide lock tray.
9. Replace the toner cartridge.
10. Close the top cover.
11. Plug in power cord and turn printer power on.
120 User's Guide