4. Use a soft, clean cloth, to wipe off any toner residue and paper dust from the area
shown below:
5. Close the top cover and plug the power cord back into the power outlet.
6. Plug in power cord and turn on the printer.
Cleaning the Registration Roller Area
When you replace a toner cartridge, you usually clean this area. If you have a problem
with toner being smeared on your paper, cleaning this area may help:
1. Turn off the printer and unplug the power cord.
2. Open the top cover and remove the toner cartridge. (Place the toner cartridge in a
protective bag to avoid direct sunlight.)
3. Use a soft, clean cloth, to wipe off any toner residue and paper dust from the silver
metal strip (2). (The silver metal strip is located by the green handle labeled 2.)
Avoid touching the transfer charging roller (1) as this could cause poor print quality.
4. Close the top cover and plug the power cord back into the power outlet. Turn on
the printer.
Chapter 6. Maintaining the Printer 145