Installing a Hard Drive Important
Follow the instructions for handling static-sensitive devices described on page 150.
Use the following procedure to install a hard drive:
1. Power off the printer.
CAUTION:
Failure to turn off the printer before working with its internal components can
result in electric shock.
2. Unplug the printer from the wall outlet.
3. Remove the power cord from the back of the printer.
4. Remove any cables attached to the controller board.
5. At the back of the printer, loosen the thumb screws that fasten the controller board.
6. Remove the controller board by pulling controller board toward you.
7. Unpack the hard drive.
8. Position the hard drive with the four screws facing the four matching holes on the
controller card. (See Figure 16 on page 154 for location.)
Chapter 7. Installing Printer Options 159