Figure 74. 10-Port 10Base-FB DIP Switches
The DIP switches let you perform the following:
•Use DIP switch positions 1 through 4 to assign all the ports on the module to
one of the backplane segments or isolated-1 segment. Note that when using
DIP switches, all the ports will be assigned to the same segment, so in
effect, you cannot do per-port switching.
Table 17 on page 103 shows the meaning of settings for DIP switches 1 thru
4:
Table 24. 10-Port 10Base-FB Module DIP Switch Settings
Network Selection Switch 1 Switch 2 Switch 3 Switch 4
Ethernet_1 ON ON ON ON
Ethernet_2 OFF ON ON ON
Ethernet_3 ON OFF ON ON
Ethernet_4 OFF OFF ON ON
Ethernet_5 ON ON OFF ON
Ethernet_6 OFF ON OFF ON
Ethernet_7 ON OFF OFF ON
Ethernet_8 OFF OFF OFF ON
Isolated_1 ON ON ON OFF
Chapter 7. 8260 Ethernet Modules 117