10.5.1.5 Ring Station Configuration Group
The
The RMON probe can initiate the removal of a station from the ring by sending a Remove Station MAC frame. It keeps the following configuration parameters of each station:
∙
∙
∙
∙
MAC address Microcode EC level Group address Functional address
10.5.1.6 Source Routing Group
The information collected by the
Do not use the information provided by this group if you are using transparent bridging or a mixed bridging/routing environment as it might not be accurate.
The
In Frames | Contains the count of frames sent into this ring |
| from another ring. |
In Octets | Contains the count of octets in good frames |
| sent into this ring from another ring. |
Out Frames | Contains the count of frames sent from this ring |
| to another ring. |
Out Octets | Contains the count of octets in good frames |
| sent from this ring to another ring. |
Through Frames | Contains the count of frames sent from another |
| ring through this ring, to another ring. |
Through Octets | Contains the count of octets in good frames |
| sent from another ring through this ring, to |
| another ring. |
Contains the total number of good frames | |
| received that were |
Contains the total number of octets in good | |
| frames received that were |
Contains the total number of good frames | |
| received that were |
| Contains the total number of octets in good |
| frames received that were |
| broadcast. |
Local LLC Frames | Contains the total number of frames received |
| that had no Routing Information Field (RIF) or |
| had a RIF that only included the local ring |
| number and were not |
| frames. RIF contains route information |
| provided by the Bridge Program used in the |
Chapter 10. 8260 RMON Support 211