IBM 8260 manual IP Security, Following parameters can be viewed/modified for each entry

￿						￿
	Config *
		OSPF Static Default Convert TablModule: BladeRunner
	System		Page 1	Time:	17:49 11 Jan 95
	TOS	Hop Count	Metric
0		1	10
0		2	20
0		3	30
0		4	40
0		5	50
0		6	60
0		7	70
0		8	80
0		9	90
0		10	100

Modify Entry	Prev Page	Next	Page	Exit
Return to the previous screen

￿		￿
Figure	182. LMS OSPF Default Static Convert Table Panel

The following parameters can be viewed/modified for each entry:

∙

∙

Hop Count

This parameter specifies hop count measured in RIP.

Metric

This parameter specifies the metric in OSPF converted from RIP.

15.You may define filtering information for IP packets as described in 11.8.9, ªIP Security.º

11.8.9IP Security

IP security feature of the Multiprotocol Interconnect module allows you to define filters which are used to determine which IP packets are forwarded and which ones are discarded when the Multiprotocol Interconnect module is performing IP routing functions.

The IP security feature is comprised of up to 31 different Security Tables and a Security Access List. Each security table can contain up to 64 address entries and is identified by a list no.

To use IP security, you must do the following:

1.Create one or more IP security tables to define the filtering information against which the incoming packets may be checked. To do so, you must select IP Security Table from the IP Menu. An example of an IP security table is shown in Figure 183 on page 305.

304 8260 Multiprotocol Intelligent Switching Hub