 
8260A> show tr_surrogate 8.2 surr_status
Surrogate Status Data for Network TOKEN_RING_7
------------------------------------------------------------------------
Surrogate Admin Status: ENABLED
Port Mac Address: 10-00-f1-0b-58-00
Ring Segment: 0000
Ring Utilization: 0.0%
REM Admin Status: ENABLED
REM Oper Status: Active
CRS Admin Status: ENABLED
CRS Oper Status: Active
8260A>
 
Figure 133. Displaying the Status of Surrogate Features
10.7.1.2 Enabling Individual Options within the Surrogate Groups
Once the surrogate features are enabled, you may enable the individual
surrogate options within the surrogate groups, using the following commands:

SET TR_SURROGATE {slot.subslot} REM_STATUS {options}

SET TR_SURROGATE {slot.subslot} CRS_STATUS {options}

SET TR_SURROGATE {slot.subslot} CRS_STATIONS {options}

For details of the permitted options, please refer to the

DMM Command Guide

,
SA33-0275.
You can display the status of individual options within each surrogate group
using the following commands:
•Status of REM options

SHOW TR_SURROGATE {slot.subslot} REM_STATUS

An example of the output from this command is shown in Figure 134 on
page 235.
234 8260 Multiprotocol Intelligent Switching Hub