IBM 8870 manual Remote Supervisor Adapter II-EXA connectors and LEDs

Remote Supervisor Adapter II-EXA connectors and LEDs: This group of connectors and LEDs on the back of the server is used for system-management information and control.

	Heartbeat LED		Ethernet activity LED
External power	(amber)		(green)
		RSA II - EXA	Ethernet link LED
connector		breakout port	(green)

Power LED	Video port	10/100
(green)		Ethernet port

Figure 4. Remote Supervisor Adapter II-EXA connectors and LEDs

vExternal power connector: You can connect an optional ac power adapter to this connector.

vHeartbeat LED: This amber LED flashes continuously to indicate that there is activity on the Remote Supervisor Adapter II-EXA.

vRSA II-EXA breakout port: Connect the RSA II-EXA breakout cable to this port to provide two ASM interconnect ports, one USB port, and one Management port.

vEthernet activity LED: This green LED is lit when there is activity on the Ethernet LAN.

vEthernet link LED: This green LED is lit when the Ethernet link is active.

v10/100 Ethernet port: Connect Ethernet signal cables to this port.

vVideo port: Connect a monitor or console switch to this port.

Important: If your server has a Remote Supervisor Adapter II-EXA installed, the integrated video controller is disabled. You must connect a monitor or console switch to the video port on the Remote Supervisor Adapter II-EXA.

vPower LED: This green LED comes on and stays lit when you plug in your server.

Remote Supervisor Adapter connectors and LEDs: This group of connectors and LEDs on the back of the server is used for system-management information and control.

			Ethernet activity LED
			(green)
External power	Error LED	ASM interconnect	Ethernet link LED
connector	(amber)	port	(green)

Power LED	Management port	10/100
(green)		Ethernet port

Figure 5. Remote Supervisor Adapter connectors and LEDs

12xSeries 445 Type 8870: User’s Guide