9. Save and Exit the Configuration/Setup Utility Program.
Note: See the software documentation that comes with your operating system to install your operating system.
Deleting a scalable partition
Complete the following steps to delete the scalable partition:
1.Start the Configuration/Setup Utility on the primary server.
2.From the main menu, select Advanced Setup.
3.Select Scalable Partition Settings.
4.Select either Delete ALL Scalable Partition or Delete ONLY Local Scalable Partition.
Note: Do not select Write Scalable Partition Settings when you delete the scalable partition.
5.Exit the Configuration/Setup Utility program.
6.Turn off the servers.
7.If necessary, remove the SMP Expansion cables and reconnect them according to your new configuration. See ″Connecting the cables″ in the Option Installation Guide on the IBM xSeries Documentation CD.
8.Restart the servers.
Remote console redirection
From the Devices and I/O Ports choice, you can enable and configure the remote console redirection through the Remote Console Redirection submenu. The Devices and I/O Ports choice is on the full Configuration/Setup menu only.
Complete the following steps to enable and configure the remote console redirection feature:
1.Ensure that you have installed and enabled the serial port that comes with your server. See ″Installing the serial port″ in the Installation Guide.
2.From the Devices and I/O Ports choice, use the arrow keys to select Remote Console Redirection; then, press Enter. The Remote Console Redirection window opens.
3.In the Remote Console Redirection window, Enable the remote console redirection and enter the necessary settings for the server to work with a remote console.
Note: The remote console settings must match those in the Remote Console Redirection window to ensure proper operation.
4.Once you have made the necessary changes, press Esc.
5.Select Save Settings; then, press Enter.
6.Confirm your selection; then, exit the Configuration/Setup Utility program.
7.Connect the server to a remote console using a null modem cable.
