Complete the following steps to start the LSI Logic Configuration Utility program:
1.Turn on the server.
2.When the prompt <<< Press <CTRL><C> to start LSI Logic Configuration Utility >>> appears, press Ctrl+C. If you have set an administrator password, you are prompted to type the password.
3.Use the arrow keys to select a controller (channel) from the list of adapters; then, press Enter.
4.Follow the instructions on the screen to change the settings of the selected items; then, press Enter. If you select Device Properties or Mirroring Properties, additional screens are displayed.
Using ServeRAID Manager
Use ServeRAID Manager, which is on the IBM ServeRAID Support CD, to:
vConfigure a redundant array of independent disks (RAID)
vRestore a SCSI hard disk drive to the
vView your RAID configuration and associated devices
vMonitor the operation of your RAID controllers
To perform some tasks, you can run ServeRAID Manager as an installed program. However, to configure the integrated SCSI controller with RAID capabilities and perform an initial RAID configuration on your server, you must run ServeRAID Manager in Startable CD mode, as described in the instructions in this section. If you install a different type of RAID adapter in your server, use the configuration method described in the instructions that come with that adapter to view or change SCSI settings for attached devices.
See the ServeRAID documentation on the IBM ServeRAID Support CD for additional information about RAID technology and instructions for using ServeRAID Manager to configure your integrated SCSI controller with RAID capabilities. Additional information about ServeRAID Manager is also available from the Help menu. For information about a specific object in the ServeRAID Manager tree, select the object and click Actions ⇒ Hints and tips.
