4.Click Go.

5.Click OK.

10.3.10Creating CKD LCUs

Under Simulated Manager, zSeries, perform the following steps:

1.Click LCUs.

2.Click the Select Action pull-down and highlight Create.

3.Click Go.

4.Click the check box next to the LCU ID you wish to create.

5.Click Next.

6.In the panel returned, make the following entries:

a.Enter the desired SSID

b.Select the LCU type

c.Accept the defaults on the other input boxes, unless you are using Copy Services.

7.Click Next.

8.Click Finish.

10.3.11Creating CKD volumes

Under Simulated Manager, zSeries, perform the following steps:

1.Click Volumes zSeries.

2.Click the Select Action pull-down, and highlight Create.

3.Click Go.

4.In the Select Extent pool panel, click the radio button next to the targeted extent pool you want to configure the volume from.

5.Click Next.

6.Click the Volume type pull-down and select the Volume type desired.

7.Highlight the LCU number or work with all available LCUs.

8.Click Next.

9.In the Define base properties panel do the following:

a.Select the radio button next to the addressing policy.

b.Enter the quantity of base volumes.

c.Enter the base start address.

d.Click Next.

10.In the next panel returned, do the following:

a.Enter the volume Nickname.

b.Enter the volume prefix.

c.Enter the volume suffix. 11.Click Next.

Chapter 10. The DS Storage Manager - logical configuration 227

Page 249
Image 249
IBM DS8000 manual Creating CKD LCUs, Creating CKD volumes, Click Finish, Click Volumes → zSeries