Fonts
Although the 4230 Printer can print with downloaded symbol sets, the 4230 Printer prints only with
single-byte resident symbol sets when driven by PSF.
Because of differences between font technologies, text printed with symbol sets will not have the same
appearance as text printed with the raster fonts of the same names.
Infoprint Manager for Windows NT and Windows 2000
Use the font mapping file supplied with Infoprint Manager. Refer to Working with Fonts on the
Infoprint Manager for Windows NT and Windows 2000 web page for more information about using
fonts.
Infoprint Manager for AIX
Use the font mapping file supplied with Infoprint Manager. Refer to Infoprint Manager forAIX:
Administrator’s Guide for more information about using fonts.
PSF for OS/390
Touse the resident raster fonts, the system programmer must identify them to PSF using the
APSRMARK utility. Refer to Print Services Facility for OS/390: Customization for more information
about using resident fonts.
PSF/VMYoucannot print with resident fonts, but you can print with downloaded raster fonts. Refer to Print
Services Facility/VM: System Programming Guide for more information about using fonts.
PSF/VSE
Touse the resident raster fonts, the system programmer must identify them to PSF using the
APTRMARK utility. Refer to Print Services Facility/VSE: System Programming Guide for more
information about using resident fonts.
PSF for AS/400
Refer to AS/400 Printer Device Programming for more information about using fonts.
Operator-Adjustable Forms
Toalign data on preprinted forms, the 4230 Printer operator can adjust the physical top and left margins,
which will offset the page image on the printing medium. The horizontal (left margin) adjustment range is
from −6.9 mm (−0.27 inches) to +38.35 mm (+1.51 inches). The vertical (top margin) adjustment range is
from −30.5 mm (−1.2 inches) to +38.1 mm (+1.5 inches). This adjustment does not affect the size of the
valid printable area; however, using this adjustment can produce positioning errors if the horizontal
adjustment is too large for the form being used.
Print-Quality Levels
The 4230 Printer allows you to select different levels of print quality.Higher quality corresponds to slower
print speeds. Toselect a print-quality level, use the QUALITY subcommand on the COPYGROUP
command in the form definition. Touse Fast Draft Quality, you must enable it using a printer configuration
menu on the operator panel. Refer to your printer publications on how to do this. If the printer is not
configured, all requests to print using Fast Draft will automatically be printed in DP Quality.Specify the
values shown in Table82 on the QUALITY subcommand to get the correct print-quality level.
Table82. 4230 Printer Print-Quality Selection Values
Print-Quality Level Hexadecimal ValueRange Decimal ValueRange
Reserved X'00'
Fast Draft Quality X'01' through X'2A' 1 through 42
DP Quality X'2B' through X'55' 43through 85
122 Printer Information