Table70. Infoprint 2000 NP1 and RP1 Printers’Characteristics (continued)
Characteristics Characteristic Value
Infoprint 2000–NP1
Infoprint 2000–RP1
MICR printing no
Duplex printing yes
Color no
Adjust print-quality levels no
Printhead resolution 600 dots-per-inch
Maximum impressions per month (duty cycle) 2,000,000
Printable Area
The Infoprint 2000–NP1 and –RP1 printers do not support edge-to-edge printing. The leading .05 inch (1
mm) is in a non-printable area. Any information in the non-printable area will be truncated. Figure21
shows an example of the printable area of a form.
Media Size and Configuration
The media loaded for your printer must match the media size in the printer configuration. If these sizes do
not match, a printer error code indicates that this mismatch must be corrected by either changing the
media at the printer or by changing the configuration to match the media.
Media Specifications
The Infoprint 2000 accepts the following media:
Media types:
vXerographic, bond, book, duplicator, mimeographic, uncoated offset, ledger (tabloid), cover,
index, bristol, and other long-grain plain papers (such as dual-purpose).
vPrepunched paper of these types:
–International and Japan Standard 2–hole
–U.S. and Japan 3–hole
–German Standard 2–and 4–hole
–Swedish Standard
–U.S. 5–Hole
–Bell/AT&TSystems 7–hole
vRecycled paper
Printable
Area
0.05inch
LeadingEdge
Figure21. Printable Area in IPDS Mode on the Infoprint 2000 NP1 and RP1 Printers
66 Printer Information