Table101. ASCII Support for the 6400 Printer (continued)
System Software - Minimum Level Emulation
IBMAS/400 OS/400 Version2.3 Host Print Transform Proprinter III XL, Epson FX
OS/400 Version2.3 Proprinter III XL, Epson FX
PC Support/400 Version2.3 Proprinter III XL, Epson FX
IBM 5250 Enhanced Emulation for DOS
Version2.4 Proprinter III XL, Epson FX
IBM 5252 Emulation for Windows Version1.1 Proprinter III XL, Epson FX
Personal Communications forAS/400 for
Windows Version Proprinter III XL, Epson FX
Personal Communications forAS/400 for
OS/2 Version4.0 Proprinter III XL, Epson FX
ClientAccess/400 Version 3.1 Proprinter III XL, Epson FX
3174 withAEA ReleaseA5.4 or later, Release B4.0 or later,
or Release C1.1 or later Proprinter III XL, Epson FX
Network Operating System Support
The Network Print Server features are supported in the following environments:
Table102. Caption. Description
Protocol Operating System
IPX/SPX Novell NetWare 3.11 and above
Novell NetWare 4.01 and above using bindery emulation
TCP/IP Novell NetWare 3.11and above
Novell NetWare 4.01 and above using bindery emulation
IBM LAN Server 1.3 and above
Microsoft LAN Manager 2.0c and above
Windows NT 3.1 and above
AIX 3.2.5, 4.1
NETBIOS/NETBEUI IBM LAN Server 1.3 and above
Microsoft LAN Manager 2.0c and above
Windows NT 3.1 and above
Supported TCP/IP print methods are LPD, FTP,and Reverse Telnet.
Operator-Adjustable Forms
Using the Set Topof Forms key on the operator panel, the operator can select where the first line of
printing is relative to the top edge of the paper.
Toalign data on preprinted forms, the 6400 Printer operator can adjust the physical top and left margins,
which offsets the page image on the printing medium. The horizontal (left margin) adjustment range is
from −6.9 mm (−0.27 inches) to +38.35 mm (+1.51 inches). The vertical (top margin) adjustment range is
from −30.5 mm (−1.2 inches) to −38.1 mm (+1.5 inches). This adjustment does not affect the size of the
valid printable area; however, using this adjustment can produce positioning errors if the horizontal
adjustment is too large for the form being used.
148 Printer Information