Installing the device driver
Run the Info Technician to install the scanner drivers. To do so:
1 . Insert disk 1 of the Info Technician into the computer’s floppy drive.
2.In Windows Program Manager, select the Run command from he File menu. If you are using Windows 95, select Run from the Start menu on the desktop.
3.Type A:\SETUP at the command line and click OK. Substitute the appropriate drive letter if the disk is not in the A drive.
4.Follow the on screen directions.
The scanner’s device driver is installed in the proper directory, along with the TWAIN driver.
5.Reboot the computer after the installation is complete to activate the scanner drivers.
Mac and compatibles installation
The ImageReader FB is capable of running on a Macintosh or Mac compatibles as well as PCs. If this unit shipped with Mac software and a
Scanner installation
Set the scanner to a unique SCSI ID. Attach the
Once the scanner is attached and near the location you want it, unlock the scanning mecha- nism. The scanner is locked for transport to avoid damage to the assembly. You must unlock the scanner