SentinelRAID 170 Installation and Hardware Reference Manual 1-6 SR ComponentsConnector Type Label Description
SCSI-320 Connectors CH0, CH1, CH2 and CH3 68-pin VHDCI connectors that facilitate the
connection of the SCSI-320 I/O channels to
external devices.
I2C Connector J3 I2C supports the monitoring of remote
enclosure devices.
Battery Connector J1 Allows an optional battery backup unit (BBU)
to be connected to the system.
COM1 and COM2
Connector JP16 and JP17 These connectors are used for serial port
communications. One COM port (COM1) can
be used for terminal emulation.
SCSI Terminators JP20 This 8-pin jumper is used to terminate the
different I/O channels.
RJ-45 Ethernet
Connector JP23 This connector provides users with access to
LAN and web-based management of the
controller.
Table 1-2: Controller Board Interfaces
Figure1-5: Controller Board (Rear)