Infortrend 170 manual Daughter Board Installation

SentinelRAID 170 Installation and Hardware Reference Manual

Figure 2-7: Install the Daughter Board

Step 3. Insert the retention screws. Once the daughter board has been mounted on the board-to-board connectors, insert the retention screws that came with the daughter board. (See Figure 2-8)

Figure 2-8: Install the Daughter Board Retention Screws

Step 4. Replace the chassis top cover. Once the daughter board has been installed on the controller board, reinstall the chassis top cover. For further instructions on how to reinstall the chassis top cover, please refer to Section 2.6.2.

2-10 Daughter Board Installation