Intel MD566X manual 10. V.90/V.92 Mode DCE-to-ISP Response Codes, Verbose Code Numeric Code

56K V.92 Data, Fax, and Voice Chipset

Table 2-9. S-Register Summary (Continued)

Note	Register	Function	Default	Range	Units	Reported
						by &Vn
*	S22	Bit-mapped options	118	–	–	no
*	S23	Bit-mapped options	none	–	–	no
*	S25	Detect DTR change	5	0–255	0.01 second	yes
*	S27	Bit-mapped options	64	–	–	no
*	S30	Disconnect inactivity timer	0	0–255	minute	yes
*	S31	Bit-mapped options	49	–	–	no
*	S33	Sleep mode timer	10	0–90	second	yes
*	S37	Maximum line speed attempted	0	0–35	–	yes

Note: The manufacturing-only S-registers S91 and S92 are listed in the Manufacturing-Only Commands in Table 2-13 on page 23.

* Value saved in NVRAM.

Table 2-10. V.90/V.92 Mode DCE-to-ISP Response Codes

Verbose Code	Numeric Code
CONNECT 33333	33
CONNECT 37333	34
CONNECT 41333	35
CONNECT 42667	36
CONNECT 44000	37
CONNECT 45333	38
CONNECT 46667	39
CONNECT 48000	42
CONNECT 49333	43
CONNECT 50667	53
CONNECT 52000	54
CONNECT 53333	55
CONNECT 54666	56
CONNECT 56000	57
CONNECT (DTE protocol) / data	See Note following
compression / TX:(DCE transmit data
	Table 2-12on page 23
rate) / RX:(DCE receive data rate)

Programmer’s Guide Intel Confidential 21