56K V.92 Data, Fax, and Voice Chipset

Table 3-4. Data Mode Command Descriptions (Continued)

Call Waiting Enable: This command controls the action to be taken upon detection of call waiting in a V.92 DCS.

+PCW=m

0

m = 0

 

 

m = 1

 

 

m = 2

Toggle V.24 Circuit 125 and collect Caller ID if enabled by +VCID Hang up

Ignore V.92 call waiting

Modem on Hold Enable: This command controls whether or not modem on hold procedures are enabled during V.92 operation.

+PMH=m 0

m = 0 Enables V.92 modem on hold

m = 1 Disables V.92 modem on hold

Modem on Hold Timer: This command controls whether or not the modem will grant or deny a Modem on-hold (MOH) request as well as setting the Modem-on- Hold-Timeout.

m = 0 m = 1 m = 2 m = 3 m = 4

+PMHT=m none m = 5 m = 6 m = 7 m = 8 m = 9 m = 10 m = 11 m = 12 m = 13

Deny V.92 Modem-on-hold Request Grant MOH with 10 second timeout Grant MOH with 20 second timeout Grant MOH with 30 second timeout Grant MOH with 40 second timeout Grant MOH with 1 minute timeout Grant MOH with 2 minute timeout Grant MOH with 3 minute timeout Grant MOH with 4 minute timeout Grant MOH with 6 minute timeout Grant MOH with 8 minute timeout Grant MOH with 12 minute timeout Grant MOH with 16 minute timeout Grant MOH with indefinite timeout

Programmer’s Guide

Intel Confidential

59

Page 59
Image 59
Intel MD566X manual +PCW=m, +PMH=m