AT+VTS= , ,duration For example AT+VTS= , ,50 | Intel MD566X

56K V.92 Data, Fax, and Voice Chipset

Table 6-1. Voice Mode Command Descriptions (Continued)

DTMF and Tone Generation: (cont.)

c) This command can be used to send a period of silence in a tone string. Use the following format:

AT+VTS=[ , ,<duration>]

AT+VTS=[ ]

For example: AT+VTS=[ , ,50]

This sends a 500-ms period of silence.

3) Single DTMF tones or hookflashes are sent enclosed in braces “{ }”. A duration must be included, as the duration set in +VTD=n does not apply.

Use the following format:

			AT+VTS={<DTMF or !>,<duration>}
			For example: AT+VTS={2,30}
			This command sends DTMF tone 2 with a duration of 300 ms.
			For example: AT+VTS={!,50}
			This command sends a hook flash with a duration of 500 ms.
	+VTS=m	none	Send multiple DTMF signals and tones by combining elements in a given
	(cont.)	none	+VTS=m command string. For example:
	(cont.)		+VTS=m command string. For example:
			AT+VTS={!,30}, 1, 2, [1000,1300,50], !, {*,6}, [1000], 9

This command line programs the following events:

1.Hook-flash with a duration of 300 ms.

2.Send DTMF 1 for the duration specified by +VTD command.

3.Send DTMF 2 for the duration specified by +VTD command.

4.Send tone pair 1000 Hz and 1300 Hz for a duration of 500 ms.

5.Hook-flash with a duration specified by +VTD command.

6.Send DTMF * for a duration of 60 ms.

7.Send tone 1000 Hz for a duration specified by the +VTD command.

8.Send DTMF 9 for the duration specified by +VTD command.

For example:

AT+VTS=1, [, ,50], 2, [ ], 9

This command line programs the following events:

1.Send DTMF 1 for the duration specified by +VTD command.

2.Play silence for a duration of 500 ms.

3.Send DTMF 2 for the duration specified by +VTD command.

4.Play silence for a duration specified by +VTD command.

5.Send DTMF 9 for the duration specified by +VTD command.

Programmer’s Guide

Intel Confidential

99

Image 99

Intel MD566X manual AT+VTS= , ,duration For example AT+VTS= , ,50

Contents

MD566X Revision History Acronym Definition Symbol Units of measureConventions Programmer’s Guide Dram Chipset Contents Qty IntroductionIntel V.90/V.92 56K Chipsets Modem Connection Overview V.92, V.90 and V.34 Data Modes DTE-to-DCE Data Rates for Each Mode DCE-to-DCE Data Rates for Each ModeMode Data Rate bps Affected Data AT Command Summary Tables Data Mode Command SummaryCommand Function Default Range Reported by Intel Confidential Data rate Result code type Yes Ports only Async mode +GMI? Intel Confidential Command Function Default Range Reported By &Vn V.44 / V.42 / V.42 bis MNP∗ Command Summary Intel Confidential Value saved in Nvram Fax Identity Command Summary Fax Class 1 Command SummaryIS-101 Voice Command Summary Response Hex Code Function Voice DTE→DCE Character Pairs Voice DTE←DCE Character Pairs Dial Modifiers Command Function Register Function Default Range Units Reported By &VnS-Register Summary Verbose Code Numeric Code 10. V.90/V.92 Mode DCE-to-ISP Response Codes 12. DTE-to-DCE Data Rate Response Codes 11. V.34 Mode DCE-to-DCE Response Codes Command Function Default Range 13. Manufacturing-Only Command Summary a Modem Setup Host Command Modem Response Basic Data Mode AT CommandsUsing AT Commands to Access the S-Registers Sn?, Sn=x, ? Modem Responses and Command Echo En, Vn, Xn, Wn, Qn Example of a Remote Connection Information Product Identification Information Establishing a Modem Connection A, D, DS = n, S0 Online Command Mode Escape Codes, On Hanging Up Hn, S10, Zn, &D2Modem-to-Modem Connection Data Rates Intel Confidential Intel Confidential ATH +PMHF +PMHR Carrier Description Supported Modulation Types S37 +MS = carrier , automode, min rate, max rate Figured to attempt only a 28,800 bps connec Originating Answering Resulting Connection Speed Modem Local Analog Loopback AT&T1 Diagnostic Testing S18, &Tn AT&T0 Local Analog Loopback with Self-Test Local Analog Loopback With Self-Test AT&T8 AT Escape Sequences Licensing Requirements for Hayes Escape SequenceTime-Independent Escape Sequence Hayes∗ Escape Sequence Data Mode Command Descriptions Command Default DescriptionNone Stant carrier mode Dialing Digits Online data mode echo Reports product code ATI5 Cont Mode from online command mode Sn? Sn=x Protocol Lapm Sequent commands to be ignored For data mode Ports asynchronous mode. This command is the same as &M0 User profile n Zn=x None Modem power-up +GMR? V34BS +MS=m See m Cont Modulation Selection Examples DTE data rate = 115,200 bps +MS=mExamples DTE data rate = 2400 bps +PMH=m +PCW=m DCE +PMHR none Mand +PSS=m Intel Confidential Mode Features Error Correction and Data Compression Resulting \Nn Connection Types Bis with fallback to MNP5 \N3 \Bn None \An \Cn \Gn\Jn \Nn \Kn \Qn \Tn\Xn Intel Confidential 0,471 +DS44=m 972,140140,1884 3768 Tocols FAX Class 1 AT CommandsFax Identity Commands Fax Identity Command Descriptions +FREV?/+FMR? none Fax Class 1 Commands Value Modulation Speed Bps Mod Selection Table Class 1 DTE-Generated Hdlc Frame Information AT+FTH=mod +FCLASS=1 Fax Mode Command Descriptions +FRS=n None Command Default Description Receive Hdlc Data+FRH=n +FRM=n None DTE after receiving the +FTH=mod command Data using the modulation selected in mod Each command may be used as follows IS-101 Voice Mode AT Commands Relay Control Dtmf Detection +FLO=n Voice Mode Command Descriptions +VCID=n +VBT=m Enable Report Function +VDR=m+VEM=m See m Dialtone +VEM=m Example 1. Viewing Supported Events Example 2. Setting the Event MaskExample 3. Reading the Event Mask Settings Event Reporting and Masking +VGT=n +VGM=n 128+VGR=n 128 +VGS=n +VIP none +VLS=n Code Relay/Playback Control Primitive Code +VLS=n+VNH=n Intel Confidential +VRX none +VSD=m See ‘m’ = sds, sdi Defaults m = 128 Vsr Comments Samples/second Manufac +VSM=m turer- specified Hard Disk Compression Method Selection+VSM=m Manufac Vsr +VTD=n 100 +VSP=n +VTS=m none AT+VTS=DTMF or Dtmf and Tone Generation AT+VTS= , ,duration For example AT+VTS= , ,50 Intel Confidential Registers S-Register Command Descriptions Ascii decimal S10 S11S12 S16 S14 138 S22 118 S21 S27 S23 None S31 S33 Maximum Line Speed Attempted 110 Caller ID Tags for Formatted Reporting Caller ID Ring MANUFACTURING-ONLY Commands Manufacturing-Only Command DescriptionsNCnn S92 S91 $TTnn FAX Test Tone Test Command Analog Loopback ALB Test #VGP2=n Command Bit Pins#VGP0=n #VGP1=n See Note 118 Parallel Host Interface 16C450/16C550A Uart Programmer’s Guide119 Register BIT Number Address Name Parallel Host Interface Uart Register Bit Assignments Line Status Register LSR Uart Register DefinitionsScratch Register SCR Modem Status Register MSR Modem Control Register MCR Are no subsequent Fifo errors 123 Line Control Register LCR Trigger Level Bytes Fifo Control Register FCR Interrupt Identity Register IIR Interrupt Control Functions125 Interrupt Enable Register IER Transmitter Holding Register THR10.1.10Receiver Buffer Register RBR Programmable Data Rates Fifo Interrupt Mode Operation10.2 16C550A Uart Fifo Operation 10.1.11Divisor Latch Registers DLM and DLL Fifo Polled Mode Operation 129 130