+Gmr? | Intel MD566X manual

56K V.92 Data, Fax, and Voice Chipset

Table 3-4. Data Mode Command Descriptions (Continued)

Generate Data Modem Calling Tone: This command allows the DTE to select whether the modem sends a 1300-Hz calling tone or V.8 calling tone when originat- ing a data modem connection.

-Cn	0	n = 0**	Calling tone disabled
		n = 1	1300-Hz calling tone sent for all data modem connections
		n = 2	V.8 calling tone sent for V.34 modulation and 1300-Hz calling tone
			sent for all other modulations

		Identify Modem Manufacturer: This command causes the DCE to send a message
		to the DTE indicating the DCE manufacturer. This command is identical to AT+FM-
		FR? and AT+FMI?.
+GMI?	none	AT+GMI?
		AT+GMI?

Intel Corporation

OK

Identify Product Model: This command causes the DCE to report the modem chipset name. This command is identical to AT+FMDL? and AT+FMM? commands.

+GMM?

none

AT+GMM?

MD56xx

OK

Identify Product Revision: This command causes the DCE to report the modem chipset revision level. This command is identical to AT+FREV? and AT+FMR?.

+GMR?

none

AT+GMR?

CD08.55-612 (10/19/99) PARALLEL-SPEAKERPHONE O5

OK

Programmer’s Guide

Intel Confidential

55

Image 55

Intel MD566X manual +Gmr?

Contents

MD566X Revision History Acronym Definition Symbol Units of measureConventions Programmer’s Guide Dram Introduction Chipset Contents QtyIntel V.90/V.92 56K Chipsets Modem Connection Overview V.92, V.90 and V.34 Data Modes DCE-to-DCE Data Rates for Each Mode DTE-to-DCE Data Rates for Each ModeMode Data Rate bps Affected Data Data Mode Command Summary AT Command Summary TablesCommand Function Default Range Reported by Intel Confidential Data rate Result code type Yes Ports only Async mode +GMI? Intel Confidential Command Function Default Range Reported By &Vn V.44 / V.42 / V.42 bis MNP∗ Command Summary Intel Confidential Value saved in Nvram Fax Class 1 Command Summary Fax Identity Command SummaryIS-101 Voice Command Summary Response Hex Code Function Voice DTE→DCE Character Pairs Voice DTE←DCE Character Pairs Register Function Default Range Units Reported By &Vn Dial Modifiers Command FunctionS-Register Summary Verbose Code Numeric Code 10. V.90/V.92 Mode DCE-to-ISP Response Codes 12. DTE-to-DCE Data Rate Response Codes 11. V.34 Mode DCE-to-DCE Response Codes Command Function Default Range 13. Manufacturing-Only Command Summary a Modem Setup Host Command Modem Response Basic Data Mode AT CommandsUsing AT Commands to Access the S-Registers Sn?, Sn=x, ? Modem Responses and Command Echo En, Vn, Xn, Wn, Qn Example of a Remote Connection Information Product Identification Information Establishing a Modem Connection A, D, DS = n, S0 Hanging Up Hn, S10, Zn, &D2 Online Command Mode Escape Codes, OnModem-to-Modem Connection Data Rates Intel Confidential Intel Confidential ATH +PMHF +PMHR Carrier Description Supported Modulation Types S37 +MS = carrier , automode, min rate, max rate Figured to attempt only a 28,800 bps connec Originating Answering Resulting Connection Speed Modem Local Analog Loopback AT&T1 Diagnostic Testing S18, &Tn AT&T0 Local Analog Loopback with Self-Test Local Analog Loopback With Self-Test AT&T8 Licensing Requirements for Hayes Escape Sequence AT Escape SequencesTime-Independent Escape Sequence Hayes∗ Escape Sequence Command Default Description Data Mode Command DescriptionsNone Stant carrier mode Dialing Digits Online data mode echo Reports product code ATI5 Cont Mode from online command mode Sn? Sn=x Protocol Lapm Sequent commands to be ignored For data mode Ports asynchronous mode. This command is the same as &M0 User profile n Zn=x None Modem power-up +GMR? V34BS +MS=m See m Cont Modulation Selection +MS=m Examples DTE data rate = 115,200 bpsExamples DTE data rate = 2400 bps +PMH=m +PCW=m DCE +PMHR none Mand +PSS=m Intel Confidential Mode Features Error Correction and Data Compression Resulting \Nn Connection Types Bis with fallback to MNP5 \N3 \Bn None \An \Gn \Cn\Jn \Nn \Kn \Tn \Qn\Xn Intel Confidential +DS44=m 972,140 0,471140,1884 3768 Tocols FAX Class 1 AT CommandsFax Identity Commands Fax Identity Command Descriptions +FREV?/+FMR? none Fax Class 1 Commands Value Modulation Speed Bps Mod Selection Table Class 1 DTE-Generated Hdlc Frame Information AT+FTH=mod +FCLASS=1 Fax Mode Command Descriptions +FRS=n None Command Default Description Receive Hdlc Data+FRH=n +FRM=n None DTE after receiving the +FTH=mod command Data using the modulation selected in mod Each command may be used as follows IS-101 Voice Mode AT Commands Relay Control Dtmf Detection +FLO=n Voice Mode Command Descriptions +VCID=n +VBT=m +VDR=m Enable Report Function+VEM=m See m Dialtone +VEM=m Example 1. Viewing Supported Events Example 2. Setting the Event MaskExample 3. Reading the Event Mask Settings Event Reporting and Masking +VGT=n +VGM=n 128+VGR=n 128 +VGS=n +VIP none +VLS=n Code Primitive Code +VLS=n Relay/Playback Control+VNH=n Intel Confidential +VRX none +VSD=m See ‘m’ = sds, sdi Defaults m = 128 Vsr Comments Samples/second Manufac +VSM=m turer- specified Hard Disk Compression Method Selection+VSM=m Manufac Vsr +VTD=n 100 +VSP=n +VTS=m none AT+VTS=DTMF or Dtmf and Tone Generation AT+VTS= , ,duration For example AT+VTS= , ,50 Intel Confidential Registers S-Register Command Descriptions Ascii decimal S11 S10S12 S16 S14 138 S22 118 S21 S27 S23 None S31 S33 Maximum Line Speed Attempted 110 Caller ID Tags for Formatted Reporting Caller ID Ring Manufacturing-Only Command Descriptions MANUFACTURING-ONLY CommandsNCnn S92 S91 $TTnn FAX Test Tone Test Command Analog Loopback ALB Test #VGP2=n Command Bit Pins#VGP0=n #VGP1=n See Note 118 Programmer’s Guide Parallel Host Interface 16C450/16C550A Uart119 Register BIT Number Address Name Parallel Host Interface Uart Register Bit Assignments Line Status Register LSR Uart Register DefinitionsScratch Register SCR Modem Status Register MSR Modem Control Register MCR Are no subsequent Fifo errors 123 Line Control Register LCR Trigger Level Bytes Fifo Control Register FCR Interrupt Control Functions Interrupt Identity Register IIR125 Transmitter Holding Register THR Interrupt Enable Register IER10.1.10Receiver Buffer Register RBR Programmable Data Rates Fifo Interrupt Mode Operation10.2 16C550A Uart Fifo Operation 10.1.11Divisor Latch Registers DLM and DLL Fifo Polled Mode Operation 129 130