Installing Red Hat* Enterprise Linux 4*
Intel® Server Board S5000PAL
rescue:
This command runs rescue mode. Refer to the Red Hat Enterprise Linux System Administration Guide for more information about rescue mode.
resolution=:
Tells the installation program which video mode to run. It accepts any standard resolution, such as 640x480, 800x600, 1024x768, and so on.
serial:
This command turns on serial console support.
skipddc:
This x86 boot command skips the ddc monitor probe which causes problems on some systems.
text:
This command disables the graphical installation program and forces the installation program to run in text mode.
updates:
This command prompts you to insert a ?oppy diskette containing updates (bug fixes). It is not needed if you are performing a network installation and have already placed the updates image contents in RHupdates/ on the server.
vnc:
This command allows you to install from a VNC server.
vncpassword=:
This command sets the password used to connect to the VNC server
54
