1 Baseboard Description
Baseboard Features
Table 1. Baseboard Features
Feature
Processor
Memory, dynamic random access (DRAM)
Video memory (DRAM)
PCI Segment A bus PCI Segment B bus PCI Segment C bus
PCI Bus Master IDE Interface
USB Interface
Server Management
Graphics
SCSI
System I/O
Form Factor
Description
Installed: Up to four Intel®Pentium®III Xeon™ processors, packaged in single edge contact (S.E.C.) cartridges and installed in
Single
Installed: 256 MB to 16 GB of error correcting code (ECC) memory. A minimum of four DIMMs must be installed.
Installed: 2 MB of video memory.
∙Two
∙One DesotoE2
∙One Adaptec†
∙Four
∙One DesotoE2
∙Two
∙OSB4 I/O APIC.
∙PCI network interface controller.
∙ATI Rage† IIc video controller.
∙PCI narrow/wide Adaptec
The baseboard supports Ultra DMA33 Synchronous Direct Memory Access (DMA) mode transfers.
The baseboard provides a dual external USB connector and one internally accessible header.
Thermal/voltage monitoring and error handling.
Front panel controls and indicators (LEDs).
ATI Rage IIc VGA Graphics Accelerator, along with video SGRAM and support circuitry for an embedded SVGA video subsystem.
Two embedded SCSI controllers:
Adaptec
Adaptec
Advanced parallel port, supporting Enhanced Parallel Port (EPP) levels 1.7 and 1.9, ECP, compatible
VGA video port,
Two serial ports,
13