4.Attach the internal cable to the internal connector on the ICMB card. The internal cable connection to the card is noted by "A" in Figure 11.
A
OM09928
Figure 11. Internal Cable Attached to the ICMB Card
5.Connect the other end of the cable to the ICMB connector on the baseboard. The location of the connector is shown in Figure 1 on page 14.
6.The ICMB kit contains an external cable. The cable attaches to the card’s external connector. The external cable connection to the card is noted by "A" in Figure 12.
A
OM09929
Figure 12. External Cable Attached to the Card
Removing an ICMB Card
1.Disconnect the internal and external cables from the card and the baseboard.
2.Remove the screw securing the card to the chassis. The screw is noted by "A" in Figure 10 on page 74.
3.Remove the ICMB card from the server.
Removing and Installing Baseboard Components | 75 |