System Configuration Check
Before executing the tests, the system hardware is scanned and a message is displayed for confirmation. Before continuing with the tests, check the accuracy of the scan. Once you are sure that the system has successfully scanned the system hardware, press <Enter>.
To cancel press <Ctrl + Break>. A message is displayed and instructs you to check all hardware and cable connections before returning to the test menu.
SAMPLE SCREEN DISPLAY
| DiagWiz Test Configuration |
Base Memory Size: | 640KB |
CPU Type: | Pentium® III Processor |
CPU Speed: | 550MHz |
CPU SMP #0: | Present |
CPU SMP #1: | Present |
Keyboard Type: | |
Mouse: | Enabled |
RTC RAM Size: | 128 |
Number of SCSI | 2 |
Channels: |
|
COM2 at Port Address: | 2F8 is enabled |
LPT1: | 0x378 |
Floppy Cfg. Drive A: | 1.44MB (3.5 inch) |
Hard Drive 0: | Cylinders: 531 Heads: 255 Sectors:65 Total Size: |
| 4157MB |
Video Subsystem: | Rage IIC, 1024K video RAM |
External Cache Size: | 512KB |
Memory Size: | 128MB |
If the above configuration is correct, press <Enter> to continue or press <Ctrl + Break> to quit.
86 | SKA4 Baseboard Product Guide |