Hard Drive Submenu

For options on this menu, use the up or down arrow keys to select a device. Press the <+> or <-> keys to move the device higher or lower in the boot priority list.

Table 34. Hard Drive Submenu

Option

1.Drive #1 (or actual drive string)

2.Other bootable cards

(additional entries for each drive that has a PnP header)

Description

Other bootable cards cover all the boot devices that are not reported to the system BIOS through BIOS Boot Specification mechanisms. It may or may not be bootable, and may not correspond to any device.

Removable Devices Selection Submenu

For options on this menu, use the up or down arrow keys to select a device.

Table 35. Removable Devices Selection Submenu

Feature

Lists Bootable Removable devices in the system.

Option

+/-

Description

This list includes legacy 1.44 MB floppy drives and 120 MB floppy drives.

Exit Menu

You can make the following selections on the Exit Menu. Select an option using the up or down arrow keys. Press <Enter> to run the option. Pressing <Esc> does not exit this menu. You must select one of the items from the menu or menu bar to exit.

Table 36. Exit Menu

Choices

Exit Saving Changes

Exit Discarding Changes

Load Setup Defaults

Save Custom Defaults

Discard Changes

Save Changes

Description

Exits and saves changes to CMOS.

Exits without saving changes to CMOS. User is prompted if any of the Setup fields were modified.

Loads default values for all Setup data.

Loads settings from custom defaults.

Reads previous values of all Setup data from CMOS.

Saves Setup data to CMOS.

Configuration Software and Utilities

43