Installing an ICMB Card

1. Remove the ICMB card and internal cable. The cable is noted by "A" in Figure 9.

A

OM09926

Figure 9. Section of ICMB Internal Cable

2.Designate a PCI slot for the ICMB card. The card does not plug into the connector on the baseboard, but does use the opening at the rear of the chassis.

3.Secure the filler panel to the chassis. On most systems, you use one screw. The screw is noted by "A" in Figure 10.

A

OM09927

Figure 10. Example of an ICMB Card Attached to a Chassis

74

SKA4 Baseboard Product Guide