Navigation
To:
Get general help
Move between menus
Go to the previous item
Go to the next Item
Change the value of an item
Select an item or display a submenu
Leave a submenu or exit Setup
Reset to Setup defaults
Save and exit Setup
Press:
<F1> or <Alt+H>
←→
−
↓
+ or - <Enter> <Esc> <F9> <F10>
Display
When you see this:
On screen, an option is shown but you cannot select it or move to that field.
On screen, the phrase Press Enter appears next to the option.
What it means:
You cannot change or configure the option in that menu screen for one of the following reasons:
∙The option is
∙You must use a different Setup screen to change it.
∙You must use the SSU.
Press <Enter> to display a submenu that is either a separate
The rest of this section lists the features that display onscreen after you press <F2> to enter Setup. Not all of the option choices are described, because (1) a few are not
Main Menu
Table 7 lists the selections you can make on the Main Menu itself. Use the submenus for other selections. Default values are in bold.
Table 7. Main Menu
Feature
System Time
System Date
Legacy Diskette A:
Legacy Diskette B:
Primary IDE Master
Primary IDE Slave
Processor Settings
Language
Choices
HH:MM:SS
MM/DD/YYYY
Disabled
1.44/1.25 MB 3½"
2.88 MB 3½ "
Disabled
1.44/1.25 MB 3½"
2.88MB 3½"
N/A
N/A
N/A
English (US)
French
Spanish
German
Italian
Japanese (Kanji)
Description
Sets the system time.
Sets the system date.
Selects the diskette type.
Selects the diskette type.
Enters submenu.
Enters submenu.
Enters submenu.
Selects which language BIOS displays.
✏NOTE
Serial redirection does not work with Kanji.
Configuration Software and Utilities | 31 |