Console Redirection Submenu
Table 29. Console Redirection Submenu
Feature | Choices | Description |
COM Port Address: | Disabled | When enabled, Console Redirection uses the I/O port specified. |
Redirection | 3F8 | When disabled, Console Redirection is completely disabled. |
disabled | 2F8 |
|
| 3E8 |
|
IRQ # | 3 or 4 | When Console Redirection is enabled, this displays the IRQ |
|
| assigned per the address chosen in the COM Port Address field. |
Baud Rate | 9600 | When Console Redirection is enabled, use the baud rate |
| 19.2k | specified. |
| 38.4k | When the Direct Platform Control (DPC) shares the COM port as |
| 115.2k | console redirection, the baud rate must be set to 19.2k to match |
|
| DPC baud rate, unless the autobaud feature is used. |
Flow Control | No flow control | None disallows flow control. |
| CTS/RTS | CTS/RTS is hardware based flow control. |
| XON/XOFF | XON/XOFF is software flow control. |
| CTS/RTS + CD | CTS/RTS +CD is hardware based plus |
|
| When DPC is sharing the Comm port as Console Redirection, the |
|
| flow control must be set to XON/XOFF or XON/XOFF+CD |
|
| depending on whether a modem is used. |
EMP Configuration Submenu
Table 30. EMP Configuration Submenu
Feature | Choices | Description |
EMP Password | Disabled | Enabled/Disables EMP password. |
Switch | Enabled |
|
|
|
|
EMP ESC | +++ or other | Escape string for the modem EMP port. |
Sequence | text |
|
EMP | ATH or other | |
String | text |
|
Modem Init String | ATE1Q0V1X4& | 20 characters to set up the modem. |
| D0S0=0 or |
|
| other text |
|
EMP Access Mode | Establishes EMP access mode. | |
| Always |
|
| Active |
|
| Disabled |
|
EMP Restricted | Disabled | Enables/Disables EMP Restricted Mode Access. |
Mode Access | Enabled |
|
EMP Direct | Direct Connect | Establishes connection for EMP port. |
Connect/Modem | Modem Mode |
|
Mode |
|
|
System Phone | [Phone number] | Phone number of system you are dialing into. |
Number |
|
|
Configuration Software and Utilities | 41 |