The Field Replacement Unit (FRU) and Sensor Data Record (SDR) load utility is a
∙Discovers the product configuration based on instructions in a master configuration file
∙Displays the FRU information
∙Updates the EEPROM associated with the Baseboard Management Controller (BMC) that holds the SDR and FRU area
∙Updates the DMI FRU area located in the BIOS nonvolatile storage device
∙Generically handles FRU devices that might not be associated with the BMC
What You Need to Do
Run the utility either directly from the configuration software CD or from diskettes created from the CD.
If you run the FRUSDR Load Utility from a diskette, copy the utility from the CD. Follow the instructions in the included README.TXT file.
If the diskette drive is disabled, or improperly configured, use BIOS Setup to enable it. If necessary, disable the drive after you are done with the FRUSDR utility.
How You Use the FRUSDR Load Utility
The utility:
∙Is compatible with
∙Accepts CFG, SDR, and FRU load files (the executable file for the utility is frusdr.exe)
∙Requires the following supporting files
⎯one or more .fru files describing the system’s field replaceable units
⎯a .cfg file describing the system configuration
⎯an .sdr file describing the sensors in the system
Command Line Format
The basic command line format is
frusdr
Table 43. Command Line Format
Command
Description
Displays usage information
Displays requested area only
Uses custom CFG file
Pause between blocks of data
Configuration Software and Utilities | 51 |