PCI Device, Slot 8
Table 22. PCI Device, Slot 8 Submenu
Feature | Choices |
Option ROM Scan | Enabled |
| Disabled |
Description
Initializes device expansion ROM.
Enable Master | Enabled | Enables the selected device as a PCI bus master. |
| Disabled |
|
Latency Timer | Default | Minimum guaranteed time, in units of PCI bus clocks, that a |
| 020h | device can be master on a PCI bus. Typically, option ROM |
| 040h | code overwrites the value set by the BIOS. |
| 060h |
|
| 080h |
|
| 0A0h |
|
| 0C0h |
|
| 0E0h |
|
Table 23.
Feature | Choices | Description |
Enabled | If enabled, the system uses resource padding and the Hot- | |
Support | Disabled | Plug resource table. |
Resource Padding | Disabled | Determines amount of resources used by each |
Level | Minimum | PCI slot. |
| Maximum |
|
|
|
|
Empty Bus Default | 33 MHtz | Unoccupied bus default speed. |
Speed | 66 MHtz |
|
Integrated Peripheral Configuration Submenu
Table 24. Integrated Peripheral Configuration Submenu
Feature | Choices | Description |
COM1: | Disabled | If set to "Auto", BIOS configures the port. |
| Enabled | If set to "OS Controlled", the OS configures the port. |
| Auto |
|
| OS Controlled |
|
|
|
|
Base I/O Address | 3F8h | Selects the base I/O address for COM port A. |
| 2F8h |
|
| 3E8h |
|
| 2E8h |
|
Interrupt | IRQ 4 | Selects the IRQ for COM port A. |
| IRQ 3 |
|
COM2: | Disabled | If set to "Auto", BIOS configures the port. |
| Enabled | If set to "OS Controlled", the OS configures the port. |
| Auto |
|
| OS Controlled |
|
|
| continued |
Configuration Software and Utilities | 37 |