1.Holding the DIMM only by its edges, remove it from its antistatic package.

2.Orient the DIMM so that the two notches in the bottom edge of the DIMM align with the keyed socket on the memory module. See Figure 4.

OM09920

Figure 4. Installing DIMMs: Orientation of DIMM in a Memory Module

3.Insert the bottom edge of the DIMM into the socket, then press down firmly on the DIMM until it seats correctly.

4.Gently push the plastic ejector levers on the socket ends to the upright position.

5.Repeat the steps to install each DIMM.

Processors

CAUTIONS

Processor must be appropriate: You might damage the system if you install a processor that is inappropriate for your system. Make sure your system can handle the thermal and power conditions of the newer, faster processor. For exact information about processor interchangeability, contact your customer service representative.

ESD and handling processors: Reduce the risk of electrostatic

discharge (ESD) damage to the processor by doing the following: (1) Touch the metal chassis before touching the processor or baseboard. Keep part of your body in contact with the metal chassis to dissipate the static charge while handling the processor. (2) Avoid moving around unnecessarily.

Removing and Installing Baseboard Components

63