Table 50. Auxiliary Power Connector (J9B2) (continued)

 

 

 

Current Carrying

 

Pin

Signal

Type*

Capability

Description

9

PS PWR ON_L

out

N/A

Control signal from baseboard to power

 

 

 

 

supply

10

Ground

ground

 

Ground return connection

11

-12V

power

 

Power Supply negative 12V

12

Key

 

N/A

 

13

12V

power

 

Power Supply 12V

14

Ground

ground

 

Ground return connection

*Type (in, out, in/out, power, ground) is from the perspective of the baseboard.

Front Panel Interface (J9E3)

The front panel attaches to a 30-pin header on the baseboard. The header contains reset, NMI, sleep, and power control buttons, LED indicators, and an IPMB connection. The table below summarizes the front panel signal pins, including the signal mnemonic, name, and brief description.

Table 51. Front Panel Connector (J9E3)

Pin

Signal

Type*

Description

1

SPKR_FP

out

SPEAKER DATA for the front panel/chassis mounted

 

 

 

speaker.

2

GROUND

ground

GROUND is the power supply ground.

3

CHASSIS_INTRUSION

in

CHASSIS INTRUSION is connected to the BMC and

 

 

 

indicates that the chassis has been opened.

 

 

 

CHASSIS_INTRUSION is pulled high to +5 V standby on the

 

 

 

baseboard.

4

FP_HD_ACT*

out

HARD DRIVE ACTIVITY indicates there is activity on one of

 

 

 

the hard disk controllers in the system.

5

+5V

power

+5 V is the 5 volt power supply.

6

FP_SLP_BTN*

in

FRONT PANEL SLEEP is connected to the BMC and causes

 

 

 

the system to be put to sleep if supported by the operating

 

 

 

system. FP_SLP_BTN* is pulled high to +5 V on the

 

 

 

baseboard and is intended to be connected to a momentary-

 

 

 

contact push button (connected to GROUND when pushed)

 

 

 

on the system front.

7

COOL_FLT_LED*

out

COOLING FAULT LED indicates that either a fan failure has

 

 

 

occurred or the system is approaching an over-temperature

 

 

 

situation. COOL_FLT_LED* is an output of the BMC.

8

PWR_LED*

out

POWER PRESENT LED.

9

PWR_FLT_LED*

out

SYSTEM FAULT indicates that either a power fault or SCSI

 

 

 

drive failure has occurred in the system.

10

GROUND

ground

GROUND is the power supply ground.

11

SM_IMB_SDA

in/out

I2C DATA is the data signal for the Intelligent Platform

 

 

 

Management Bus.

 

 

 

continued

94

SKA4 Baseboard Product Guide