Table 24. Integrated Peripheral Configuration Submenu (continued)
Feature | Choices | Description |
Base I/O Address | 3F8h | Selects the base I/O address for COM port B. |
| 2F8h |
|
| 3E8h |
|
| 2E8h |
|
Interrupt | IRQ 4 | Selects the interrupt for COM port B. |
| IRQ 3 |
|
Parallel Port | Disabled | If set to "Auto", BIOS configures the port. |
| Enabled | If set to "OS Controlled", the OS configures the port. |
| Auto |
|
| OS Controlled |
|
Mode | Output only | Selects mode for parallel port. |
|
| |
| EPP |
|
| ECP |
|
Base I/O Address | 378 | Selects the base I/O address for parallel port. |
| 278 |
|
Interrupt | IRQ 5 | Selects the interrupt for parallel port. |
| IRQ 7 |
|
DMA Channel | DMA 1 | Selects the DMA channel for parallel port. |
| DMA 3 |
|
Floppy Disk Controller | Enabled | If enabled, the system enables the floppy disk |
| Disabled | controller. |
Advanced Chipset Control Submenu
Table 25. Advanced Chipset Control Submenu
Feature | Option | Description |
Base RAM Step | 1 MB | Selects the size of step to use during Base RAM tests. |
| 1 KB |
|
| Every location |
|
Extended RAM Step | 1 MB | Selects the size of the step to use during Extended |
| 1 KB | RAM tests. |
| Every location |
|
| No Memory Test |
|
Remap Memory | Enable | Enables or disables remapping some amount of |
| Disable | memory lost to PCI devices. This is an advanced |
|
| feature. Consult the technical product specification |
|
| before changing this option. |
38 | SKA4 Baseboard Product Guide |