Manuals / Intelligent Motion Systems / Household Appliance / Home Safety Product

Intelligent Motion Systems Motion Detector Initialization Screen, Communications Port Operations

Models: Motion Detector

1 74

Download 74 pages 21.4 Kb

Page 57

Initialization Screen

Initialization Screen

This screen will be active under five conditions:

1.When the program initially starts up and seeks for a compatible device.

2.The User selects File > Exit when connected to the device.

3.The User clicks the Exit button while connected to the device.

4.The Upgrade Process completes.

5.The SPI Motor Interface is unable to connect to a compatible device.

Figure 2.6.11: SPI Motor Interface Initialization

Port Menu

The Port Menu allows the user to select the COM Port that the device is connected to, either a parallel (LPT) Port, or a Hardware Serial or Virtual Serial Port via USB.

The Reconnect option allows the user to reconnect to a unit using the previously used settings. On open or reconnect, the SPI Motor Interface will also try to auto seek for a connected device.

Communications

Port Operations

Select Parallel (LPT) Port

Select Serial or USB (VCP)

Auto-seek Port and Reconnect to device

Figure 2.6.12: SPI Motor Interface Port Menu

Part 2: Interfacing and Configuring

37

Image 57

Intelligent Motion Systems Motion Detector Initialization Screen, Communications Port Operations, Port Menu

Contents

MICROSTEPPING POWER DRIVEFORCETM OPERATING INSTRUCTIONSMicrostepping MForce PowerDrive Product Manual Important information Qualification of personnelIntended Use This page intentionally left blank Table Of Contents Part 2 Connecting and InterfacingPart 1 Hardware Reference Appendix A Optional Prototype Development Cables AppendicesList of Figures Part 2 Connecting and InterfacingPart 1 Hardware Reference Part 1: Interfacing and Configuring List of TablesAppendices Part 1 Hardware ReferenceGETTING STARTED Microstepping MForce PowerDrivePower Ground MForce PowerDrive FrontConnect Opto Reference and Logic Inputs Connecting the MotorPOWER DRIVE PART HARDWARE REFERENCEFORCETM MICROSTEPPINGPage Intentionally Left Blank Configuring SECTIONFeatures and Benefits Electrical Specifications General SpecificationsThermal Specifications I/O SpecificationsMicrostepping MForce PowerDrive Setup Parameters Setup ParametersDefault NamePin Assignment - P1 Power, I/O and SPI Recommended Connector Shell and Pins12-PinLocking Wire Crimp Pin Assignment and DescriptionPins 2 x Molex P/N P3 Connector - DC Power, 2-PinLocking Wire CrimpP4 Connector - Motor Recommended Connector Shell and PinsParameter Setup Cable and Adapters Options and AccessoriesMating connector to MForce 4-pinmotor interface Prototype Development CablePage Intentionally Left Blank FORCETM PART INTERFACING AND CONFIGURINGMICROSTEPPING MICRO DRIVEPage Intentionally Left Blank MForce PowerDrive Mounting and Connection GuidelinesFigure 2.1.1 Base Mounting the MForce PowerDrive SECTIONFigure 2.1.2 End Mounting the MForce PowerDrive Securing Power Leads and Logic LeadsMounting Hole Pattern Layout and Interface GuidelinesRules of Wiring Power P3Recommended Wiring Recommended Mating Connectors and PinsPage Intentionally Left Blank SECTION Interfacing DC PowerISP300-7Unregulated Switching Supply DC Power Supply RecommendationsRecommended IMS Power Supplies IP804 Unregulated Linear SupplyBasic DC Power Connection P3 2 + P3Recommended Power and Cable Configurations Example A DC Power Cabling Under 50 FeetWARNING! DO NOT connect or disconnect power leads SECTION Motor Selection and InterfaceSelecting a Motor Winding Inductance8 Lead Stepping Motor Series Configuration 8 Lead Stepping Motor Parallel ConfigurationRecommended IMS Motors 23 Frame Enhanced 6.0A 23 Frame Enhanced 3.0A34 Frame Enhanced 6.3A Single ShaftConnecting the Motor PHASE A PHASE A PHASE B PHASE BPhase Connector PinPHASE A PHASE B PHASE APHASE B PHASE AMForce PowerDrive Phase Outputs A A B B PHASE A PHASE A PHASE B PHASE BRecommended Motor Cabling Motor Connections A A B BTable 2.3.1 Recommended Wire Gauges MForce PowerDrive Recommended Motor Cable AWGExample B Motor Cabling Greater Than 50 Feet Figure 2.3.8 Motor Cableing Greater than 50 FeetPage Isolated Logic Input Pins and Connections Logic Interface and ConnectionIsolated Logic Input Characteristics Enable InputQuadrature Function Step/Direction FunctionUp/Down Function Step ClockStep DirectionChannel A Channel BMicrostepping MForce PowerDriveFigure 2.4.4 Optocoupler Input Circuit Diagram Optocoupler ReferencePNP Open Collector Interface Sourcing NPN Open Collector Interface SinkingInput Connection Examples Figure 2.4.5 Open Collector Interface ExampleSwitch Interface Sourcing Switch Interface SinkingMicrostepping MForce PowerDrive Microstepping MForce PowerDriveMForce PowerDrive Front Power GroundMinimum Required Connections Opto ReferenceConnecting the SPI Interface Connecting SPI CommunicationsSPI Signal Overview SECTIONSPI Pins and Connections Part 2 Interfacing and ConfiguringLogic Level Shifting and Conditioning Circuit Microstepping MForce PowerDrive #1 Microstepping MForce PowerDriveMicrostepping MForce PowerDrive #2 SPI ClockConfiguration Parameters and Ranges Using the IMS SPI Motor Interface InstallationMicrostepping MForce PowerDrive Setup Parameters Table 2.6.1 Setup Parameters and RangesIMS SPI Motor Interface Menu Options View Settings ScreenFile Perform File OperationFigure 2.6.5 SPI Motor Interface Upgrade Menu UpgradePart 2 Interfacing and Configuring Recall1.MSEL Microstep Resolution Select MSEL Microstep Resolution SelectionTable 2.6.2 Microstep Resolution Settings HCDT Hold Current Delay Time Connected/Disconnected IndicatorFactory ExitInput Clock Filter Settings Screen 2 I/O Settings Configuration ScreenTable 2.6.4 Input Clock Filter Settings Enable Active High/LowFault Indication MForce34Plus Microstepping Fault CodesIMS Part Number/Serial Number Screen The IMS SPI Upgrader Screen Upgrade Instructions2.Serial Number the serial number of your unit Communications Port Operations Initialization ScreenFigure 2.6.11 SPI Motor Interface Initialization Port MenuPWM Mask Motor Settings Screen PWM Current Control0x5 50 kHz Bit 0x0203 Read/Write Initial Value SECTION Using User-DefinedSPISPI Timing Notes Check Sum Calculation for SPITable 2.7.1 SPI Commands and Parameters SPI Commands and ParametersREAD WriteSPI Communications Sequence Page Intentionally Left Blank FORCETM APPENDICESMICROSTEPPING MICRO DRIVEPage Intentionally Left Blank Optional Prototype Development Cables APPENDIX CMD-CC300-000 USB to SPI Parameter Setup Cable Figure A.2 MD-CC300-000Mechanical SpecificationsInstallation Procedure for the MD-CC300-000 Installing the Cable/VCP DriversFigure A.4 Hardware Update Wizard Figure A.6 Hardware Update Wizard Screen Figure A.5 Hardware Update Wizard ScreenFigure A.7 Windows Logo Compatibility Testing a Check “Include this location in the search”To locate the Virtual COM Port Determining the Virtual COM Port VCPFigure A.9 Hardware Properties Figure A.10 Windows Device ManagerFigure A.11 PD12-1434-FL3 PD12-1434-FL3- Power, I/O and SPIGeneral Specifications Drain Wire Pin Pin Pin Pin Drain WirePrototype Development Cable PD02-2300-FL3 Prototype Development Cable PD04-MF34-FL3WARRANTY TWENTY-FOUR24 MONTH LIMITED WARRANTYOBTAINING WARRANTY SERVICE intelligent motion systems, INC Excellence in Motion