Intellinet Network Solutions INT-PSNC-UM-1106-06 user manual Image Capture Option, Before event

Image Capture Option

This is to configure image capture options when an event is triggered. When an event occurs, you can get the pre-event and post-event images by setting "Before event" and "After event."

Before event:

You may set the starting time to capture an image before the event is triggered. (Input limitation is from 0 to 30 seconds.)

After event:

You may set the finishing time to capture an image after the event is triggered. (Input limitation is from 0 to 30 seconds.)

Image capture frame rate:

Set from 1 to 15 fps when an image is being captured.

Image file name:

You may designate the image file name to send e-mail or FPT after an image is captured. All captured images are saved as .avi files (for example: Filename.avi).

Image file type:

You can choose between two options. AVI means that the camera transmits a video file. JPG means that the camera transmits a series of single JPEG images.

Append to the image file name:

You may add information to the image file name.

-Camera IP address (example: filename_192.168.1.19.avi).

-Date and time (example: filename_20020218150030.avi).

-Trigger condition flag: When selecting "Activation of digital input port," "D" may be added to the image file name (example: filename_D.avi); when selecting "Periodically every…," "P" is added to image file name (example: filename_P.avi).

-Image sequence number: With this option, you may classify a file with the same name with consecutive numbers from 000 to 999 (example: When you designate file name as "camera" and select "Image sequence number," the file name appears as camera001.avi,"

"camera002.avi" and so on through "camera999.avi").

43