2.4 Network Video Server

Video Input: To input video signal through a coaxial cable

Video Output: To output video signal through a coaxial cable.

Video Input

Video Output

On Air

Network LED

Power LED

On Air LED (Green): This LED indicates the Video Servers operating status. Once power is supplied, the LED lights and then blinks once every second as long as the video is transmitted on the network during normal operation. When there is no video transmission, the LED stops blinking. Under an event-trigger situation, the green LED becomes red and blinks rapidly. During simultaneous operation of event-trigger capture and video monitoring, it blinks rapidly and alternates between red and green. When you click "Video Server off" in the administrator’s menu, this green LED turns yellow, which shows that the IP Video Server has stopped transmitting video and audio.

Network Activity LED (Yellow): This LED indicates network activity. When lit, the network is up and running; when off, the network is down and not working.

Power LED (Red): Once power is supplied to the Video Server, the red LED will light.

Power Connector: Only use the supplied AC adapter to avoid any possible damage from electric shock.

RESET: Restore the factory default settings.

Power

I/O Connector

Ethernet

Mini-DIN Connector

Reset

Speaker Out

Microphone In

9

Page 9
Image 9
Intellinet Network Solutions INT-PSNC-UM-1106-06 Network Video Server, Video Input Video Output On Air Network LED