Intellinet Network Solutions INT-PSNC-UM-1106-06 user manual Hub-to-hub cable

		(hub-to-hub) cable.
		If the above actions don’t resolve the problem, the camera
		maybe faulty. In this case, try to localize the problem by
		connecting the camera to the serial port of a local computer,
		using the RS-232 cable.
The Power	Faulty power	Verify that you are using the provided power supply.
LED is not	supply
constantly
lit
The	Faulty cabling	1. To verify that the cables are functional, PING the address
Network		of a known existing unit on your network.
LED is off		2. If the cabling is okay and your network is reachable, you
		should receive a reply similar to this:
		. . . bytes = 32 time = 2 ms,
The	Faulty connection	Verify that the power source is properly connected.
Operating
Status LED
is off
The camera	Firewall protection	Check the Internet firewall with your system manager.
works	Default routers	Check if you need to configure the default router settings.
locally, but
not	required
externally	The Internet site’s	Configure the camera to upload your video images to an
	too heavily loaded	FTP server or an ISP.
A series of	The CCD sensor	Direct exposure to extreme sunlight or halogen light may
broad,	becomes	cause serious damage to the CCD sensor. Re-position
vertical	overloaded when	your camera into a more shaded location immediately.
white lines	the light is too	NOTE: Damage caused to a Pro Series Network Camera
appears	bright, as with	through over-exposure to direct sunlight or halogen light is
across the	reflected sunlight	not covered under the product warranty.
image
Bad focus	Focus has not	Adjust the camera manually until the image appears clear.
	been correctly
	adjusted
Noisy	Video images	Improve the lighting conditions. If this doesn’t help and the
images	may be noisy if	lighting conditions within the installation area can not be
	you are using the	improved, consider replacing the basic lens with a more
	camera in a very	sensitive lens.
	low light	Set the quality/bit rate to a higher value.
	environment or
	the bit rate/quality
	is set to very low
	values
Bad-quality	The display	Open the display properties on your desktop and configure
video	properties are	your display to show at least 65,000 colors; i.e., at least
	incorrectly	16-bit.
	configured for	NOTE: Using only 16 or 256 colors on your computer will
	your desktop	produce dithering artifacts in the image.
	The camera is not	Adjust the camera lens manually.
	focused correctly

82