Table 13: Fields in ADSL Interface Configuration Window
Field | Description |
| |
Information from Service Provider: | |
|
|
VPI/VCI | VPI/VCI values to identify the permanent virtual circuit. |
|
|
Multiplexing Method | ATM multiplexing method (LLC is the default). |
|
|
RFC1483 Protocol Mode | Protocol mode setting (Bridged is the default). |
|
|
Operating Mode | Operating mode for the physical line (Auto is the default). |
|
|
|
|
IP configuration settings | Select Dynamic IP via DHCP to enable the device to receive an |
IP address for the ADSL interface from a service provider.
Select Dynamic IP via PPPoA to enable the device to act as a PPPoA client. Enter the username and password assigned by the service provider.
Select Dynamic IP via PPPoE to enable the device to act as a PPPoE client. Enter the username and password assigned by the service provider.
Select Static IP to assign a unique and fixed IP address to the ADSL interface. Enter the interface IP address, netmask, and gateway (the gateway address is the IP address of the router port connected to the device).
If you do not know these settings, refer to the Common Settings for Service Providers document that came with the service provider device.
67
