Juniper Networks SSG 20 manual Rapid Deployment Window, Administrator Login Window

SSG 20 Hardware Installation and Configuration Guide

1. Rapid Deployment Window

Figure 24: Rapid Deployment Window

If your network uses NetScreen-Security Manager (NSM), you can use a Rapid Deployment configlet to automatically configure the device. Obtain a configlet from your NSM administrator, select Yes, select Load Configlet from:, browse to the file location, then click Next. The configlet sets up the device for you, so you don’t need to use the following steps to configure the device.

If you want to bypass the ICW and go directly to the WebUI, select the last option, then click Next.

If you are not using a configlet to configure the device and want to use the ICW, select the first option, then click Next. The ICW Welcome screen appears. Click Next. The Administrator Login window appears.

2. Administrator Login Window

Enter a new administrator login name and password, then click Next.

Figure 25: Administrator Login Window

64„