JVC GY-DV550 instruction manual Camera Menu Screen Flow, VCR Setup Menu Contd, 12-1

12. SETUP MENU

12-1 VCR Setup Menu (Cont'd)

12. SETUP MENU

12-2 Camera Menu Screen Flow

Group

Item	Setting
	Value
Upper row: Viewfinder display

Contents	Factory
	Setting

Camera Menu Screen Flow As illustrated below, the Camera Menu is a menu screen comprising several layers. The first layer of the CAMERA MENU screen is for choosing and setting the menus required in accordance with functions or purposes. The unit also allows the contents of menu settings to be stored in three files (SCENE FILE A, B, OFF).

SYSTEM

Lower row: Counter display indication
302: BACK SPACE	STANDARD
	QUICK
b-SP	St
	qU

Selection of amount of back space for recording pause.		STAND-
STANDARD : Normally use this setting.		ARD
QUICK	: Compared to STANDARD, the back space
	becomes approximately 0.4 seconds shorter.
	Use this setting when you want to start
	shooting quickly. However, in the REGEN
	mode, the time code may not continue.

• SCENE FILE A, B

By performing the FILE STORE operation on

the FILE MANAGE screen, the contents of

menu settings can be stored and retained in

the unit. However, the SET UP menu

contents are stored even if the FILE STORE

operation is not performed.

Use SCENE FILE A or B to store and retain

- - - VF	D I SP LAY - - -
SCENE	F I LE A
F . NO / F I L TER	: OFF

307:LONG PAUSE TIME

LGPt

396:BATTERY TYPE

bAtt

3MIN	To select the time (minutes) before the tape protect mode (drum head rotation
30MIN	stopped) is engaged when the record-pause, still or stop condition continues.
03	3MIN	: 3 minutes
	30MIN	: 30 minutes

30* When used in a cold environment, the setting will be 3 minutes regardless of the setting.

12V	To be set in accordance with the used battery back type.
13.2V	12V	: Choose this setting when using 12V battery
14.4V		(12V DC Flat shape type).
	13.2V	: Choose this setting when using 13.2V battery

12(Anton-Bauer Trimpack 13, Propack 13,

13Magnum 13, Compack 13).

1414.4V : Choose this setting when using 14.4V battery (Anton-Bauer Trimpack 14, Propack 14, Magnum 14, Compack 14).

Note:

30MIN

12V

the contents of menu settings that remain

more or less fixed.

• SCENE FILE OFF

Whenever you want to change the menu

settings, use this SCENE FILE.

The menu setting contents are stored in the

unit even if the FILE STORE operation is not

performed.

When shooting, select the file with the menu settings

to be used from among the three SCENE FILE files

on the CAMERA MENU screen.

Cursor

AUD I O D I SPLAY				: OFF
SAFETY		ZONE		: NORMAL
CENTER MARK				: ON
REC	T I ME			: REMA I N
ZEBRA				: 7 0 - 8 0%
PAGE BACK
	- - - OPERAT I ON - - -
	SCENE		F I LE	A
ASPECT		RAT I O		: 4 : 3
SHUT TER				: STEP
FAW				: NONE
GA I N	L			: 0 dB
GA I N	M			: 9 d B
GA I N	H			: 1 8 dB
SMOOTH		TRANS		: OFF
SPOT	L / BACK		L	: M I DDLE
PAGE BACK

CAUTION: When controlling the unit with the camera remote control unit, REMOVE will appear in the setting value section. In this case, menu settings cannot be made.

•	If this setting is neglected, the unit’s display of remaining of battery
	power and generation of battery alarm will not work correctly.

•This setting is valid when battery pack is used. It

is invalid when a DC power supply is used.

- - - CAMERA MENU - - -
SCENE F I L E	: A
VF D I SP L AY	MENU . .

OPERAT I ON MENU . .

PROCESS MENU . .

	- - - PROCESS		- - -	- - - ADVANCED PROCESS - - -
SCENE		F I LE A		SCENE F I L E	A
MASTER	BLACK		: NORMAL	COLOR MATR I X	: ON
DETA I L			: NORMAL	GAMMA	: NORMA L
DT L . V / H	BAL		: NORMAL	SK I N COLOR ADJUST . .

398:SSF MODE

SSF

OFF CUE MODE MARK MODE

oF cU nr

Selection of the S.S.F. (Super Scene Finder) mode.
S.S.F. function:While recording, the time code data of a
desired recorded scene is stored in the unit's memory
when the TAKE button on the front section is pressed.
Settings cannot be changed during recording or SAVE mode.
OFF	: S.S.F. function is not available.
CUE MODE	: Selects the CUE mode.
	When the TAKE button is pressed, the time code data of
	the scene recorded at that point is stored in the memory.
MARK MODE : Selects the MARK mode.
	When the TAKE button is pressed the first time, the time
	code of this point is stored as start point of the scene. When
	the TAKE button is pressed the second time, the time code
	of this point is stored as ending point of the scene.
For details on the S.S.F. function, see page 66.

OFF

F I L E MANAGE . . SETUP MENU . .

T I ME DATE MENU . . EX I T

Normal screen

DT L . FREQUENCY			: M I DDLE	PAGE BACK
SK I N	DT L DETECT		: OF F
V RESOLUT I ON			: NORMAL
KNEE	PO I NT		: 1 0 0%
ADVANCED		PROCESS . .
PAGE BACK
	- - -	F I LE MANAGE - - -
	SCENE F I LE		A
STORE	F I LE		: A
STORE
RESET	F I LE		: OFF
RESET

PAGE BACK

STORE OK?

TIME CODE

399:	REMOTE FF/REW
	MODE
rEFF

403:U-BIT SLAVE

UbSc

FF/REW SEARCH

FF SH

TC&UB TC

on oF

•When the VCR Setup Menu item No. 398 S.S.F. MODE is set to CUE or MARK, the time code generator’s running method is internally set to the REGEN mode.

Specifies the operation when FF/REW signal is received
from the remote connector during playback.
FF/REW : FF/REW operation performed.
SEARCH : Search operation performed.
To set whether user’s bits also should be slave-locked
when slave-locking with external time code generator.
TC&UB : User’s bits also slave-locked
TC	: User’s bits are not slave-locked

FF/ REW

TC

		- - - SETUP - - -
2 6P I N		OUT	: CPN
CHARACTER M I X			: OFF
SET UP			: ON (U MODEL)
H	PHASE		:	1 2 8
SC	COARSE		:	0
SC	F I NE		:	1 2 8
PAGE BACK
		- - - T I ME	DATE	- - -
D I SPLAY			: ON
D I SPLAY MODE			: BARS+CAM
D I SP		STYLE	: DATE&T I ME
DATE		STYLE	: MM/ DD / YY

- - SK I N COLOR AD J UST - -

	ERORR
SK I N COLOR DET .		STOP
SK I N	COLOR RANGE	: NORMA L
PAGE	BACK

ON SCREEN

416:NON DROP/ DROP (U MODEL)

tcG
516:	DISPLAY SELECT
diSP

DROP NON DROP

dF nF

TC CLOCK

tc cL

Selection of the time code generator's framing mode as
either drop or non-drop mode.
DROP	: The internal time code generator runs in drop mode.
	Choose this setting when emphasizing the recorded time.
NON DROP: The internal time code generator runs in non drop mode.
	Choose this setting when emphasizing the frame number.
Selection of the appearance of the counter display when
the COUNTER switch is set to “TC” or “UB”.
TC	: The time code is displayed.
CLOCK: The date/time is displayed.

DROP

TC

T I ME	STYLE	: 2 4HOUR
SEC	D I SPLAY	: OFF

PAGE BACK

75 76