Connecting External Devices

Managing/Editing Clips on a PC

2 Select [Change] using the cross-shaped button, and

press the Set button.

The camera recorder switches to USB mode.

Loading Clips to the PC (USB Connection Mode)

You can load clips to a PC by connecting the camera recorder to the PC via the USB port. Doing so enables clips stored in the SDHC card to be managed and edited on the PC.

Files on the SDHC card can be managed/edited on the connected PC in this mode only for USB mass storage class devices that are recognized by the said PC as a peripheral drive.

Memo :

●Files cannot be written to the SDHC card.

●Make sure to manage/edit the files using the (JVC ProHD Clip Manager) PC application software in the bundled CD- ROM.

●For details on how to install the application software, refer to the [User’s Guide] of the [SxS Memory Card Device Driver Software] inside the bundled CD-ROM.

1 Connect the camera recorder to the PC using a USB cable.

A confirmation message (Change to USB Mode) to enable the USB connection appears.

2

Memo :

●If recording is in progress (including recording on the camera recorder and device connected to the IEEE1394 terminal), the AChange to USB ModeB message appears after recording stops.

●If playback is in progress, the camera recorder switches to USB mode after the file closes automatically, such as when playback stops.

Disconnecting

Disable the connection on the PC, then remove the USB cable from the camera recorder.

Doing so exits the USB mode and switches the camera recorder to Camera mode.

Memo :

●The procedure for disabling the USB connection varies according to the PC in use. For details, refer to the instruction manual of the PC.

[USB] Terminal

PC

114