Setting Time Code and User’s Bit (continued)

Presetting the User’s Bit

You can add an 8-digit hexadecimal number as the user’s bit to the recorded image.

[USER2] Button

[MENU] Button

Set Button (R)

Cross-

Shaped

Button

(JKHI)

[CANCEL] Button

1 Select [Main Menu]B[TC/UB]B[UB Preset] and press the Set button (R). (A Page 82)

The [UB Preset] setting screen appears.

1

[TC/UB] Menu Screen

Memo :

●When the [TC GENE.] switch is set to AREGENB, the parameter is displayed as ARegenerationB and cannot be selected.

2 Use the cross-shaped button (H, I) to place the cursor at the item to set, then the cross-shaped button (J, K) to change the values.

Numbers between 0 and 9 or alphabets between A and F can be specified for the user’s bit.

Cursor

[UB Preset] Screen

Memo :

●Press the [USER2] button to reset each digit to A0B. The cursor moves to the left.

3 Check the values and press the cross-shaped button (R).

●The time code is set and the screen returns to [TC/UB].

●To cancel the setting, press the [CANCEL] button.

4 Press the [MENU] button.

Returns to the normal screen.

Setting Time Code Without Opening the Menu

[USER1] Button

[USER2] Button

[MENU] Button

Set Button (R)

Cross-

Shaped

Button

(JKHI)

[CANCEL] Button

Memo :

●Settings cannot be made in the following cases.

●[TC GENE.] switch is set to AREGENB.

●Menu screen is displayed.

●The camera recorder is not in Camera mode.

Required Settings Before Preset (A Page 47)

●Set the [TC DISPLAY] switch to ATCB.

●Set the [TC GENE.] switch to settings other than

AREGENB.

Setting Time Code

1 Hold down the [MENU] button and press the [USER1] button.

The [TC Preset] setting screen appears.

Cursor

[TC Preset] Screen (During drop frame)

48