Using AC Power (DC IN

 

Using a Battery Pack

Power)

 

 

 

 

 

Use an AC adapter (sold separately) to operate the camera recorder with AC power.

1 Connect the DC cable of the AC adapter to the [DC INPUT] terminal of the camera recorder.

Check that the power of the camera recorder and the AC adapter is turned AOFFB and connect as shown in the diagram.

[DC INPUT]

DC Cable

DC OUTPUT

AC Adapter

2 Set the [POWER] switch of the camera recorder to AONB after turning on the AC adapter.

Power will be supplied to the camera recorder.

Note :

●Do not insert or remove the DC cable during recording.

●Do not use power supply of high voltage fluctuation, containing noise such as ripple, or with insufficient capacity.

Charging the Built-In Battery

The date/time and time code data are stored in the built-in rechargeable battery.

When power is connected to the camera recorder, the built-in battery always get charged. When the power is disconnected, the battery gradually discharges.

The battery will be totally discharged if left unused for 3 months and the date/time and time code data will be reset. When this happens, set the [POWER] switch to AONB to display the [Initial Setting] screen, then set the date/time.

( A Page 25 [Setting the Clock (Initial Setting)])

Recommended Batteries

U model

: Dionic90 (Anton Bauer)

E model

: Endura-7 (IDX)

*Models with an E suffix are for the European market and will not employ the UL Listing mark.

Note :

●Make use of the recommended batteries. Heavy batteries may fall off if not used correctly.

●See the battery instruction manual on how to charge the battery.

Battery Operating Time

The following are the approximate times for continuous operation on fully-charged batteries.

Battery

Continuous Operating Time

(At 25 I)

 

 

 

Dionic90 (U model)

Approx. 3.2 h

 

 

Endura-7 (E model)

Approx. 2.5 h

 

 

Memo :

●Actual operating times may differ depending on the age of the battery, charging condition, and operating environment.

●Operating time is shortened in cold environment.

●Operating time is shortened when the electronic zoom lens and LCD screen are frequently used.

Precautions for the Battery Operation

●Do not remove the battery when the [POWER] switch is AONB.

●Do not insert or remove the DC cable when the battery is in use.

●Leaving the camera recorder unused with the battery inside will deplete the battery power even if you set the [POWER] switch to AOFFB. Remove the battery if you are not using the camera recorder.

21