(Supplied with
CANON KT14 x 4.4KRSJ C B |
|
|
|
| A | |||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
RET | W | T | A |
|
|
| M | IRIS | |
REC |
|
|
|
D E | F G HI J |
M
MANU. | SERVO |
ZOOM | |
K L M N O
AFocus Ring
BZoom Lever/Ring
To operate zoom with this lever, turn the [ZOOM] switch M and set it to AMANU.B.
CIris Ring
To operate auto iris, set the iris mode switch H to AAB.
DLens Cable
E[REC] Record Trigger Button
Starts/stops recording.
F[RET] Return Video Button
Press this button to play back and check the latest clip, according to the settings under [Clip Review] of [Switch Set...] in the [Camera Function] menu. (A Page 74)
( A Page 52 [Viewing Recorded Videos Immediately (Clip Review)])
Memo :
●When [LENS RET] of [Switch Set...] in the [Camera Function] menu is set to AFocus AssistB, this button functions as the Focus Assist button. (A Page 74)
GZoom Servo Control Lever
To operate zoom servo with the zoom servo control lever, set the [ZOOM] switch M to ASERVOB.
●Zooms into wide angle and increases the angle of view when AWB is pressed.
●Zooms into telephoto and decreases the angle of view when ATB is pressed.
●Zoom speed increases when the lever is pressed hard.
HIris Mode Switch
A: Auto iris operation mode. M : Manual iris operation mode.
IIris Momentary Button
Press and hold this button to change to auto iris mode when the iris mode switch H is set at AMB.
J[I.G.] Iris Speed Adjustment Knob
If the speed is set too fast, opening/closing of the iris becomes unstable and hunting may occur. Readjust the speed in this case.
KFilter
A transparent or UV filter for lens protection can be installed inside the lens hood from the front. Filters for various effects can also be used.
●Installable filter types
When installed on the hood | : | 82mmP0.75 |
When installed on the lens body | : | 72mmP0.75 |
LZoom Servo Connector
For connecting a zoom servo unit (sold separately).
M[ZOOM] Zoom Switch
SERVO : Enables zooming with the zoom servo control lever G.
MANU. : Enables zooming with the zoom lever/ring B.
NBack Focus Ring/Lock Screw
Exclusive ring for adjusting the back focus. After adjusting, secure with a lock screw.
( A Page 27 [Adjusting Back Focus])
O[M] Macro Focus Ring (for
Turn the ring in the direction of the arrow to take closeup shots of small objects.
Normal focusing and zooming cannot be performed in macro mode.
To take macro shots
●Set focus ring A to infinity (•).
●Set zoom ring B to the maximum wide angle.
●Rotate this ring in the direction of the arrow to adjust focus on the object.
Note :
●As the back focus knob is located nearby, be careful not to mistake the two knobs.
●Do not forget to restore the macro ring to its original position after use. ( A Page 27 [Adjusting Back Focus])
14